Rotary Actuator ECF/SSF series

Certificates

ATEX_logo kleinExida sil 3 nieuw CE keurmerk klein

Special features

Large Bearings

Large bearings

  • Large bearing area to reduce load
  • High tech polymer for low friction
  • Triple point bearings: on top of rack, on piston OD and by piston key rolling on pinion

Unique ‘V’ Seal*

V seal*optional

  • Low on coefficient of friction (due to higher hardness of material leakage up to 0.001 N l/min can be observed)
  • Long life of over 3 million cycles for ECF, no lubrication needed
  • Highly recommended for high cyclic operation application
  • Excellent response to control valve positioning due to low friction
  • Temperature range -55 to 110°C
  • Body bore finish:
    • Ra < 0.2 µ, Rp < 2.0 µ

Corrosion Protection

f DSC_3433

  • Several body options
    • Hard Anodized Aluminum (Standard)
    • Electroless Nickel Treatment (EN)
    • Epoxy Coated Actuator (CL)

Main features

ECF - Aluminum Rack & Pinion Actuator
  • Double rack and pinion construction
  • Output torque from 1 Nm to 5000 Nm
  • End-of stoke can be adjusted by + 10° / -5°
  • ISO 5211 mounting pad (2 per actuator)
  • Double acting is easily converted to single acting  (by adding springs)
  • Optimum torque can be selected because of wide variety of springs
  • Springs epoxy coated for optimum corrosion protection
  • The pinion is supported on a large area of polyacetal bearings
  • Piston and rack supported on 3 points on high performance bearings
  • Hard anodized body providing excellent corrosion resistance
  • Flat NBR seal does not rotate inside piston groove
  • Has a life of more than one million cycles
  • Optional ROTEX V-seal for lower friction and extended service life
  • Large range of accessories available
SSF - Stainless Steel Rack & Pinion Actuator
  • As ECF, however, fully stainless steel
  • Material CF8M for high corrosion resistance
  • Optionally the internals can be made of stainless steel.
  • V-seal as a standard for extended service life.
  • Extended temperature range: -40°C -/- + 110°C

ROTEX actuators are engineered to provide the longest possible service life. The optional exclusive ROTEX V-Seal polymer double lip seal offers the most efficient, dynamic sealing in the industry. The smooth inner surface of the actuator results in less friction. Massive bearings with greater surface area allow for higher load capacity. Monolithic billet pinion provides for incredible strength and durability. The hard-anodized aluminum body gives first class corrosion protection. For alkali and marine environments epoxy coating can be provided as an extra.